Auto detailing is an act that maintains the vehicle’s optimum condition, particularly inside, rather than on the outside. In car detailing, it is usually performed to restore the vehicle to its pre-accident condition, or to fix any visible and hidden damages. This can be done by either washing the car with a high pressure washer, or using an automated polisher, which uses a water-based product mixed with special chemicals to remove stains and oxidation marks, as well as polishes the surface of the vehicle to a deep shine.
Clearwater car detailing, as the name suggests, deals with the internal components of your vehicle, as well as the exteriors. Most auto detailers use polishes and detailing clay for this type of work. For example, if your vehicle’s wheels are looking dull and worn, then using a clear clay will remove the rust and grime from the wheels. Using a wet dry polisher to remove the dirt will result in the wheels looking like new. However, it is important to note that dry car detailing usually removes all types of paint finish from the wheels.

One of the most common mistakes in car detailing is over washing and over waxing. Both these methods tend to make cars look overly clean and polished. It is therefore important to make sure that you wash your car thoroughly, and then apply wax to prevent it from cracking, flaking, blistering, or peeling. Also, to make sure that your car is completely cleaned and protected, make sure you only wash car that you intend to detail.
Another mistake that car detailing artists make is over polishing their vehicles. This is actually one of the worst things you can do to your vehicle. Over polishing will not only make your vehicle look dirty, but it will also scratch and dent it making it unsafe to drive. So to avoid both of these problems, try applying a small amount of clear polish to the vehicle once you have washed it. Once you feel that you are ready to move onto the more intensive cleaning process, you can wipe away the remaining polish with a slightly damp cloth to remove any excess shine.
The last major mistake made is over washing and drying. Both washing and drying your car can result in damaging the surface of the vehicle, causing it to lose its shine and look dull. So when you are doing your car detailing, always use a squeegee when you are washing. When you dry off your vehicle, make sure you place it inside on a towel. This will help protect the paint from getting damaged from being exposed to too much heat during the drying process. So not only is washing critical when detailing, but also drying is equally important as well.
So as you can see from this article, car detailing is quite complicated, but not entirely impossible. If you follow these tips, you should be able to get a great result out of detailing your vehicle. Remember that you should always start on the top, working your way down. Also, do not forget to apply a coat of leather cleaner to provide protection for your leather upholstery. Follow these tips carefully, and you should be able to detail your car for years to come.